General Contractor in Madera County, CA

Built for rural lots across Madera County

Much of Madera County is rural residential land. Outside the City of Madera, communities like Madera Ranchos, Bonadelle Ranchos, Rolling Hills, Madera Acres and Parksdale are full of homes on bigger parcels. Those properties bring their own jobs: additions, detached shops and garages, updated kitchens and baths. As a general contractor, Ben-Rick puts the plan together and coordinates each trade, so a rural project gets the same organized schedule as a city one.

Request an Estimate Call (559) 257-2397

General Contractor work in Madera County

Permits depend on location here. Inside the City of Madera, the city's building department is the stop. The unincorporated communities go through Madera County. We work out which one applies when we visit and account for it in the scope. On the commercial side, we handle new construction and tenant improvements in the city and county alike, plus repairs after a property loss for both homes and businesses.

Out on a bigger lot, small details matter. Where will the lumber drop go? Can a concrete truck reach the pad? How long is the run from the panel to the new shop? We look at those questions on the site walk and write the answers into the scope and estimate. Then one contact keeps the project on track until we walk through the finished work together.

CA License #1030203 · Licensed & Bonded · Workers’ comp insured

Typical projects

Typical general contractor projects in Madera County

Guest house for visiting family

A couple on a larger Madera County parcel has family who visit often and stay a while. A small guest house gives everyone some room. It's a compact custom build: a slab, a framed structure, a bedroom, a bath and maybe a kitchenette. We walk the lot to pick a spot that works with the driveway and the existing utilities, then plan the runs for power and plumbing. The written scope covers foundation, framing, plumbing, electrical, sheetrock, millwork and floor finishes. Unincorporated areas are permitted through Madera County, and we go over that during the visit. One contact stays with you until the final walkthrough.

Rebuilding a rural home after a loss

A homeowner out in rural Madera County is dealing with damage to part of the house after a loss. The adjuster is scheduled, and the family needs someone who can put the repair on paper in a way the claim can use. Ben-Rick walks the house, documents what was affected, and prepares an itemized repair scope and estimate. We coordinate with the adjuster as the claim moves forward. Once the work is approved, demo and cleanup clear the damaged areas, then framing, plumbing, electrical, sheetrock and finishes rebuild them. At the end we walk every repaired room with the family and go over the work.

New building for a rural business

A business that serves the ranches and farms around it, maybe a supply shop or a service company, needs a new building on its own lot in Madera County. That's commercial new construction from the ground up. We start with the owner's plans, walk the site for access and utilities, and write a scope that runs from foundation and concrete through framing, plumbing, electrical and interior finishes. Delivery trucks and customer parking both matter on a rural lot, so we plan where materials get staged. The owner gets one contact who knows every trade on the job, from the first pour to the final walkthrough.

What's included

A general contractor runs the whole job, from the first conversation to the final walkthrough, and schedules every trade along the way. Ben-Rick Construction Inc. is a licensed Class B general building contractor that handles homes and businesses, from custom homes and remodels to tenant improvements and property loss repairs. Here's what a general contractor job with Ben-Rick in Madera County usually covers.

One point of contact

You deal with one person who knows the whole job. Questions about framing, plumbing or finishes all go to the same place.

Scheduling every trade

Concrete, framing, plumbing, electrical, drywall and finish work get lined up in the right order, so one crew isn't left waiting on another.

Homes and businesses

Custom homes, additions, kitchen and bath remodels, commercial new construction, tenant improvements and franchise build-outs all run under the same license.

Property loss repairs

After a loss, we prepare an itemized repair scope, coordinate with your adjuster and rebuild the damaged areas.

How we work

How a general contractor job runs in Madera County

Talk it through
Call or stop by the Fresno office and tell us what you have in mind. We ask about the space, the budget and what bothers you about it today.
Walk the site
We come out and look at the property in person. Measurements, access and existing conditions all get noted.
Written scope and estimate
You get a written scope and estimate before any work starts. It spells out what's included, so everyone works from the same page.
Build and final walkthrough
We schedule the trades and build the project. At the end we walk it together and go over the finished work.

FAQ

General Contractor in Madera County: questions

We're on a big lot in Madera County and want a detached shop. Can a general contractor build that?

Yes. A detached shop brings together concrete, framing, electrical and finishes, and we schedule all of it. We'll look at where it would sit and how trucks reach the spot.

Our house is in unincorporated Madera County. Where does the permit for a remodel go?

Unincorporated areas are permitted through Madera County. Whether your remodel may need one depends on the work, and we'll talk about it during the site walk.

I'm not sure if my place counts as the City of Madera or the county. Does it matter for my project?

It matters for who reviews the permit. The City of Madera handles projects inside city limits, and Madera County handles unincorporated areas. We'll sort it out when we visit.

Can a Fresno contractor really cover rural jobs in Madera County?

Madera County is part of our core service area. We plan deliveries, access and crew schedules for rural sites as part of the written scope.

My Madera County home needs a new kitchen and a second bathroom. Can that be one job?

It can. Planning them together lets the plumber and electrician work through both rooms in sequence. You get one written scope for both.

We run a small business out in Madera County and need the building redone inside. Is that something you'd do?

Yes. Commercial interior renovation and tenant improvements are part of our work. We'll walk the building and write up the scope before anything starts.

After a loss at our Madera County house, the adjuster wants a contractor's estimate. Can you help?

Yes. We prepare an itemized repair scope and estimate and coordinate with the adjuster. Then we rebuild and walk the finished work with you. You can reach us at (559) 257-2397.

I'd like to build a new home on acreage in Madera County. What's the first step?

The first step is a conversation about what you want, then a walk of the property. From there we put together a written scope and estimate covering the foundation through the finishes.

Our lot's got a long driveway and the panel's far from where we want to build. Is that gonna complicate things?

It adds planning, which is normal on rural lots. We look at the electrical run, the driveway and delivery access on the site walk. All of it goes into the written scope.

I'm worried about managing a remodel from far away. Will I have one person to call?

Yes. You'll have one point of contact for questions, scheduling and updates. The trades report to us, and we keep you posted.

Other work in Madera County

General Contractor nearby

Ready to talk about your project?

Monday–Friday, 7:00 AM – 7:00 PM · CA License #1030203

Request an Estimate (559) 257-2397