General Contractor in Sanger, CA

Your Sanger project, one schedule start to finish

Sanger sits southeast of Fresno, on the road toward the foothills. It's a city with its own building department, a mix of homes and businesses, and plenty of properties ready for their next update. Ben-Rick works in Sanger as a general contractor, which means we take the whole project on our plate. You explain what you need, and we plan how each trade gets it done.

Request an Estimate Call (559) 257-2397

General Contractor work in Sanger

In Sanger the projects cover both sides of the license. On the residential side, that means kitchen and bath remodels, additions, whole-house updates and custom homes. On the commercial side, tenant improvements, new commercial buildings and franchise build-outs. Every one of those needs concrete, framing, plumbing, electrical and finish trades in the right order, and we schedule them so each crew shows up when the job is ready for them.

Projects that need a permit in Sanger go through the city's building department. We'll talk that through during the site visit. After that, you get a written scope and estimate that lays out the work before it starts. You have one contact during the build who knows where each trade stands, and the project ends with a walkthrough of everything we did, room by room or space by space.

CA License #1030203 · Licensed & Bonded · Workers’ comp insured

Typical projects

Typical general contractor projects in Sanger

Retail space built out as a restaurant

A Sanger business owner signs a lease on a former retail space and plans to open a small restaurant. That kind of change touches almost every system. The space may need a kitchen line, grease-friendly floor finishes, more restrooms, new lighting and a dining room layout. We walk the space with the owner and review the plans. The scope covers demo, framing, plumbing for the kitchen and restrooms, electrical, ceilings, sheetrock and finishes. The City of Sanger building department reviews projects that need a permit. The owner has one contact from the first walk through the final walkthrough before opening day.

In-law suite added to the house

A Sanger family wants a parent to move in, with some privacy for everyone. An in-law suite with a bedroom, a bath and a small sitting area can make that work. It might be built as an addition on the side of the house or carved from existing space near the garage. We walk the property, look at the lot and see where plumbing and power can connect. The written scope covers foundation, framing, plumbing, electrical, sheetrock, millwork and floor finishes. One contact keeps the family informed as each trade finishes, and we walk the finished suite together.

Whole-house refresh on an older home

An older Sanger house might have everything working but nothing updated in a long time. Kitchen cabinets, bath fixtures, floors, trim and lighting all feel tired. A whole-house refresh pulls that list into one project. We walk every room, talk through priorities and write a scope that orders the work: demo and cleanup, plumbing and electrical updates, sheetrock and texture, then countertops, millwork and floor finishes. If the family stays in the house, we can phase the rooms so part of the home stays usable. You get a final walkthrough of every room we touched.

What's included

A general contractor runs the whole job, from the first conversation to the final walkthrough, and schedules every trade along the way. Ben-Rick Construction Inc. is a licensed Class B general building contractor that handles homes and businesses, from custom homes and remodels to tenant improvements and property loss repairs. Here's what a general contractor job with Ben-Rick in Sanger usually covers.

One point of contact

You deal with one person who knows the whole job. Questions about framing, plumbing or finishes all go to the same place.

Scheduling every trade

Concrete, framing, plumbing, electrical, drywall and finish work get lined up in the right order, so one crew isn't left waiting on another.

Homes and businesses

Custom homes, additions, kitchen and bath remodels, commercial new construction, tenant improvements and franchise build-outs all run under the same license.

Property loss repairs

After a loss, we prepare an itemized repair scope, coordinate with your adjuster and rebuild the damaged areas.

How we work

How a general contractor job runs in Sanger

Talk it through
Call or stop by the Fresno office and tell us what you have in mind. We ask about the space, the budget and what bothers you about it today.
Walk the site
We come out and look at the property in person. Measurements, access and existing conditions all get noted.
Written scope and estimate
You get a written scope and estimate before any work starts. It spells out what's included, so everyone works from the same page.
Build and final walkthrough
We schedule the trades and build the project. At the end we walk it together and go over the finished work.

FAQ

General Contractor in Sanger: questions

We're renovating a commercial space in Sanger for our business. Can you coordinate all the trades?

Yes. Tenant improvements are part of our commercial work, and we schedule framing, plumbing, electrical and finishes. You'll have one point of contact.

Our Sanger house needs a new kitchen. How does a general contractor handle that?

We start with a conversation and a walk of the room. Then you get a written scope and estimate, and we schedule demo, plumbing, electrical, cabinets and countertops in order.

Who handles permits for a remodel in Sanger?

Sanger has its own city building department. Whether your remodel may need a permit depends on the work, and we'll talk about it during the visit.

I'm planning a custom home in Sanger. Can you build from the ground up?

Yes. Custom homes are part of our residential work, from foundation to finishes. It starts with a site walk and a written scope.

My family's opening a franchise in Sanger. Can you build to the brand's plans?

Yes. We build franchise locations to brand plans and standards and coordinate each trade on the job.

We need an addition on our Sanger home but I don't know where to start. Can you walk me through it?

Sure. We'll talk about what you need, walk the property and look at how an addition would tie in. Then you get it all in writing.

Is Sanger close enough for a Fresno contractor to take smaller jobs?

Yes, Sanger is in our Fresno County service area. Projects start around $5,000.

Our business in Sanger had a loss. Can you handle the repair and talk with the adjuster?

Yes. We prepare an itemized repair scope, coordinate with the adjuster and rebuild the space. Then we walk it with you.

I've got two bathrooms that need updating. Can they be done at the same time?

Yes. Doing both together keeps the plumbing and finish trades on one schedule. You'll get one written scope for both.

Can I set up a site walk at my Sanger property this month?

Call (559) 257-2397, Monday through Friday, and we'll find a time to walk the property. The office is open 7:00 AM to 7:00 PM.

Other work in Sanger

General Contractor nearby

Ready to talk about your project?

Monday–Friday, 7:00 AM – 7:00 PM · CA License #1030203

Request an Estimate (559) 257-2397