Ben-Rick Construction Inc.

Tenant Improvement Contractor in Fresno, CA

Getting your Fresno suite ready for opening day

Fresno is the biggest commercial market in the region and the county seat, so leased space changes hands all the time. Offices get new tenants, retail centers fill empty units, and a restaurant closes so another can open in the same spot. Each of those moves usually needs a build-out. Ben-Rick Construction Inc. frames the new layout, reworks the electrical and plumbing, and finishes the walls, floors and millwork so the suite fits the business moving in.

Request an Estimate Call (559) 257-2397

Tenant Improvement Contractor work in Fresno

Our office is on W Bedford Ave in Fresno, so a site walk on a commercial corridor across town is a short drive. That matters when a landlord wants to meet at the suite, or when a property manager has a quick question. Older buildings in central Fresno and newer centers up north bring different surprises behind the drywall. We plan for both before the first stud goes up.

The job starts with a conversation about your lease, your layout and what the landlord has already approved. Then we walk the space and write up a scope and estimate before anyone swings a hammer. Tenant improvement work in Fresno may need a permit from the City of Fresno, and we'll talk through what your plans involve. You keep one point of contact from that first call to the final walkthrough.

CA License #1030203 · Licensed & Bonded · Workers’ comp insured

Typical projects

Typical tenant improvement contractor projects in Fresno

Small private offices for lease

A building owner in Fresno has a large vacant floor that has sat empty through two listing cycles. Smaller businesses keep asking for a single private office with a shared lobby, so the owner wants to carve the floor into several leasable rooms. We walk the floor, mark where each office door and the shared waiting area would land, and check the panel for enough circuits to give every room its own outlets and lighting. The written scope spells out the metal stud walls, sheetrock and texture, doors and hardware, and the lobby finishes. Once the owner signs off, our crew frames, wires and finishes each office so it is ready to show to the next small tenant.

Yoga studio in a retail unit

An instructor leases a former retail unit in a north Fresno center and wants to open a yoga and stretching studio. The front needs a check-in counter and cubbies, the main room needs a clear open floor, and the back needs a changing area near the restroom. On the site walk we look at the existing ceiling grid, the lighting and the floor under the old carpet. The scope covers removing the old display fixtures, framing the changing area, updating lighting so it can be dimmed, and putting down a floor finish suited to bare feet and mats. We coordinate the electrical and plumbing touches, and the instructor walks the finished room with us before the first class.

Move-in ready shells for a center

A property manager oversees a Fresno retail center with several units that keep sitting vacant because each one looks worn out. The goal is a clean, neutral starting point in every empty unit, so prospective tenants can picture their own business there. We walk each unit, note which ceilings, walls, restrooms and light fixtures need work, and write one scope with a section for every suite. The crew repairs and retextures walls, replaces tired ceiling tiles and lighting, refreshes the restrooms and lays down simple floor finishes. Because the scope is broken out unit by unit, the manager can approve them all at once or stage them as leasing picks up.

What's included

What's included

Tenant improvements turn a bare shell or a tired leased suite into a working office, shop or restaurant for the business moving in. Ben-Rick Construction Inc. handles the framing, sheetrock, electrical, plumbing, millwork and finishes as one build-out, coordinated with the landlord or property manager. Here's what a tenant improvement build-out in Fresno usually covers.

Layout and metal stud framing

New offices, break rooms and storage get framed to the plan you and the landlord agree on. Metal studs keep the walls straight and ready for finish.

Electrical and plumbing for the space

Panel work, outlets, lighting and plumbing rough-in and finish are handled as part of the build-out, placed where your staff and equipment need them.

Sheetrock, tape and texture

Walls and ceilings get hung, taped, finished and textured so the suite looks clean and ready for customers.

Millwork, hardware and flooring

Counters, cabinets, doors, hardware and floor finishes go in last, built to your plans or your franchise brand's standards.

How we work

How a tenant improvement contractor job runs in Fresno

  1. Talk it through

    Tell us about the business, the lease and what the space needs to do. We'll also ask who on the landlord's side needs to sign off.

  2. Walk the site

    We walk the suite with you, and with the landlord or property manager when possible, to see the existing walls, panel, plumbing and ceiling.

  3. Written scope and estimate

    You get an itemized written scope and estimate before any work starts. You and the landlord can review exactly what's being built.

  4. Build and final walkthrough

    Our crew builds out the space and keeps you posted along the way. We finish by walking the suite together before you move in.

FAQ

Tenant Improvement Contractor in Fresno: questions

We just signed a lease on a bare shell in a Fresno retail center. Where does a build-out even start?

It starts with your layout and the landlord's rules for the center. We walk the shell with you and look at the existing electrical and plumbing stubs. Then you get a written scope and estimate before any work begins.

I'm taking over an old office suite in central Fresno and the walls are all wrong for us. Can you move them?

Usually, yes. Most interior office walls can come out, and we frame new ones with metal studs. We check what's above the ceiling and inside the walls first so the new layout doesn't hit wiring or plumbing by surprise.

Our restaurant's moving into a Fresno space that used to be a clothing store. Is that kind of switch realistic?

It can be, and it's a bigger build-out than a retail refresh. A restaurant needs a lot more plumbing and electrical than a store, so we look closely at what the building can support. You'll see all of it spelled out in the written scope before you commit.

My landlord in Fresno wants to approve everything first. Can you work with them and keep me posted?

We're used to it. We can walk the space with the landlord or property manager, share the written scope and keep them in the loop as work moves along. Getting their sign-off early keeps everyone on the same page.

Can the build-out happen while the business next door in our Fresno center stays open?

Yes, and we plan for it. We keep dust and noise inside your suite as much as possible and keep the common areas clean. Louder work can be coordinated with the property manager so the neighbors stay comfortable.

We're opening a franchise location in north Fresno. Can you build to the brand's plans?

Yes. Franchise build-outs follow the brand's plans and finish standards, and we build to those documents. Send us the plan set and we'll walk the space against it.

Is a small tenant improvement job in Fresno worth calling a general contractor for?

If the project is around $5,000 or more, it fits the work we take on. Adding a private office, a new counter or a reworked break room are common small jobs. Call (559) 257-2397 and tell us what you're planning.

Will my Fresno build-out need city approval? The suite's inside city limits.

It may. Work that moves walls or changes electrical or plumbing often needs a permit from the City of Fresno. We'll go over what your plans involve during the site walk so you know what to expect.

The suite we leased has a dated drop ceiling and worn carpet. That's all we need fixed. Can you just refresh the interior?

Sure. A commercial interior renovation can be as simple as new ceiling tile, flooring, sheetrock repair and fresh hardware. We'll price exactly the pieces you want in the written scope.

Something happened to our leased space and the insurance adjuster's involved. Can you rebuild the suite?

Yes. We handle property loss repairs for businesses, including an itemized repair scope and coordination with the adjuster. Then we rebuild the space and do a final walkthrough with you.

More in Fresno

Other work in Fresno

Tenant Improvement Contractor nearby

Ready to talk about your project?

Monday–Friday, 7:00 AM – 7:00 PM · CA License #1030203

Request an Estimate (559) 257-2397
Call Free Estimate