Ben-Rick Construction Inc.

Commercial Contractor in Fresno, CA

Keep your Fresno business moving while the space gets built

Fresno is the biggest commercial market in the region, and it's where Ben-Rick Construction Inc. keeps its office, on W Bedford Ave. Business owners here work along busy corridors, in office buildings and in retail centers where tenants come and go. When a space changes hands, the new tenant needs walls moved, lighting redone and a layout that fits how the business actually runs. That's the kind of work we take on, close to home.

Request an Estimate Call (559) 257-2397

Commercial Contractor work in Fresno

Older buildings in central Fresno and newer centers up north bring different problems. A decades-old storefront may hide tired wiring and plumbing behind the drywall. A newer shell space may show up as bare slab and open ceiling. Either way, we plan the metal stud framing, rough-ins and finishes together so the job goes in clean. Work inside city limits may need a permit from the City of Fresno, and we build to the approved plans.

Plenty of business owners in Fresno come to us with a lease date or a grand opening already circled. So we start with a conversation about that date, walk the space with you, and put the full scope and estimate in writing before anyone swings a hammer. From there you have one person to call with questions. Projects start around $5,000, and a phone call to (559) 257-2397 is the easiest first step.

CA License #1030203 · Licensed & Bonded · Workers’ comp insured

Typical projects

Typical commercial contractor projects in Fresno

Splitting one office floor into suites

A property manager in Fresno has a large office floor that sits half empty because one big tenant is hard to find. The plan is to divide it into two or three smaller suites, each with its own entry, restroom access and electrical panel feed. We walk the floor with the manager, mark where demising walls can land without stranding windows or HVAC returns, and check how plumbing can reach a second restroom. The written scope lists the metal stud walls, new doors and hardware, electrical rough-in and finish for each suite, plus sheetrock, texture and paint. Once it's approved, the trades follow in order so each suite can be shown to prospects as soon as it's finished.

Fitness studio in a retail unit

A trainer has leased a former retail unit in a north Fresno shopping center and wants to open a small fitness studio. The room needs an open workout floor, a couple of changing rooms, restrooms with showers and a front desk near the door. On the site walk we look at the slab, since weights and rubber flooring need a flat, sound surface, and we check where drains and supply lines can run for the showers. The scope covers slab prep, plumbing rough-in and finish, metal stud framing for the changing rooms, extra outlets and lighting for the workout floor, and tough wall finishes. You see every line in writing before demo begins, and one person keeps the schedule tied to your opening date.

Hair salon in an older building

A stylist wants to open a salon in an older building in central Fresno, the kind with character up front and decades of patchwork behind the walls. A salon asks a lot from a space like that. Shampoo bowls need supply and drain lines, dryers and styling tools need more circuits than an old panel usually offers, and the finishes have to clean up easily. We open the walls carefully during demo and show the owner what's there before anything gets covered back up. The written scope covers the plumbing, the electrical panel and new circuits, fresh sheetrock, floor finishes, the reception counter and the millwork at each station. The final walkthrough happens with the owner before the first client sits down.

What's included

What's included

Ben-Rick Construction Inc. builds and renovates commercial space for business owners, tenants and property managers, from ground-up buildings to office, retail and restaurant build-outs. You get one point of contact and a written scope before work starts, so you can plan your opening around real numbers. Here's what a commercial contractor project in Fresno usually covers.

New commercial buildings

Ground-up commercial construction, from foundation and concrete through framing, rough-ins and finishes. One team keeps the trades in order on site.

Tenant improvements and build-outs

Office, retail and restaurant spaces laid out for the business moving in. Walls, ceilings, plumbing and electrical get planned together.

Franchise build-outs to brand standards

We build to the brand's plans and finish standards, down to the millwork and hardware. The result matches the rest of the chain.

Business property loss repairs

After a loss, we prepare an itemized repair scope, work with your insurance adjuster and rebuild. The goal is getting your doors open again.

How we work

How a commercial contractor job runs in Fresno

  1. Talk it through

    Call and tell us about the space, the business and when you hope to open. We'll ask about the lease, the landlord and any brand plans.

  2. Walk the site

    We walk the building or lot with you and look at what's there today. Existing walls, utilities and access all shape the plan.

  3. Written scope and estimate

    You get a written scope and estimate before any work starts. It spells out what gets built, so you can share it with your landlord, lender or franchisor.

  4. Build and final walkthrough

    We run the trades on site and keep you posted as the space comes together. At the end we walk it with you and finish the punch list.

FAQ

Commercial Contractor in Fresno: questions

We just signed a lease on a retail space in north Fresno and the landlord handed it over as a bare shell. Where do we even start?

Start with a site walk. We look at the slab, the ceiling, the utilities stubbed into the space and your layout ideas. Then you get a written scope and estimate covering framing, rough-ins and finishes before any work begins.

I'm opening a restaurant in an older Fresno building. Can you rework the kitchen side and the dining room at the same time?

Yes. Restaurant build-outs usually mean new plumbing, electrical and wall layouts in both areas, so it makes sense to plan them together. We walk the building with you, note what the existing systems can handle, and write up one scope for the whole space.

Our Fresno office feels cramped and we've added staff. Can you rearrange walls without us moving out?

Often, yes. Office renovations can be phased so part of the space stays in use while another part is framed and finished. We'll talk through which areas you need open and plan the order of work around them.

I own a small strip center in Fresno and a unit just went vacant. Can you get it ready for the next tenant?

We can. Turning over a unit might mean demo of old partitions, new sheetrock, updated lighting and fresh floor finishes. We'll walk it with you and give you a written scope you can use when talking to prospective tenants.

We're a franchise going into a Fresno retail center and corporate sent a thick plan set. Can you build to it?

Yes. Franchise build-outs follow the brand's plans and finish standards, and we build to them item by item. If something in the plans doesn't fit the existing space, we flag it early so you can check with the brand.

My building in Fresno had a property loss and my adjuster wants an itemized estimate. Can you help with that?

Yes. We prepare an itemized repair scope and estimate, coordinate with your adjuster, and then rebuild. Call (559) 257-2397 and we'll set up a time to see the damage.

Is it gonna be a problem if my Fresno build-out needs a city permit?

Many commercial build-outs inside city limits may need a permit from the City of Fresno. We build to the approved plans and keep the work ready for inspections. Your written scope shows where those steps fit in the job.

We bought a lot and want a ground-up commercial building on it. Can your team take that on from the foundation up?

Yes, commercial new construction is part of what we do. That covers foundation and concrete, framing, plumbing and electrical rough-in, and all the finishes. You'll have one point of contact through the whole build.

Our storefront's sheetrock is dinged up and the ceiling looks tired. Is a job that size worth a call?

Projects start around $5,000, so a storefront refresh with drywall repair, ceiling work and paint can fit. We'll look at it and tell you plainly what the scope would include.

I'm juggling a lease start date in Fresno and can't afford a long shutdown. How do you plan around that?

Tell us the date on the first call. We plan the order of trades and material orders around it and keep you updated as work moves along. You'll get straight answers about what's realistic.

More in Fresno

Other work in Fresno

Commercial Contractor nearby

Ready to talk about your project?

Monday–Friday, 7:00 AM – 7:00 PM · CA License #1030203

Request an Estimate (559) 257-2397
Call Free Estimate